详细说明
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 3.0 | 35 | ±5% | ±1% | 50mV |
| +12V | 0.5 | 8 | ±7% | ±1% | 120mV |
| -12V | 0 | 0.8 | ±10% | ±1% | 150mV |
| +3.3V | 1 | 35 | ±5% | ±1% | 50mV |
| +5VSB | 0 | 2 | ±5% | ±1% | 60mV |
* TEMPERATURE RANGE: OPERATING 0~40 degrees centigrade, STORAGE –20~80 degrees centigrade.
* HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & 90 VAC INPUT VOLTAGE
* EFFICIENCY: 63% AT 115V, full load
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION
* OVER VOLTAGE PROTECTION
* OVER CURRENT PROTECTION
* SHORT CIRCUIT PROTECTION
* EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A
* COOLING: TWO 40 mm DC FANS PER MODULE
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回