M2W-6500P(500W)

详细说明

500W

Server ,Storage System ,IPC ,Communication ,Networking

Dimension....

300x101x84(mm)
11.81x3.98x4.92(inch)

AC Input Spec...

VOLTAGE: 90~264VAC FULL RANGE
FREQUENCY: 47~63Hz
STEADY-STATE CURRENT: 8/4A MAXIMUM AT ANY
LOW/HIGH RANGE INPUT VOLTAGE
INRUSH CURRENT: 60/100A AT 115/230VAC

DC Output Spec...

Output VoltageTD	Output Current Min.	Output Current Max.	Regulation Load	Regulation Line	Output Ripple & Noise Max.[P-P]
5V	3.5	30	±5%	±1%	70mV
-5V	0.05	0.7	+5/-10%	±1%	120mV
+12V	2	32	±6%	±1%	120mV
-12V	0.05	0.7	+5/-10%	±1%	120mV
+3.3V	1	24	±5%	±1%	70mV
+5VSB	0.1	2.0	+5/-6%	±1%	70mV

POWER MODULE TOTAL CURRENT OF +5V AND +3.3V NOT EXCEED 40A; POWER MODULE TOTAL OUTPUT POWER NOT EXCEED 500W

Features...

* TEMPERATURE RANGE: OPERATING 0℃ ~ 40℃,STORAGE -20℃ ~ 70℃
* HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95%
* REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
* HOLD UP TIME: 1.6 ms MINIMUM AT FULL LOAD & 90VAC INPUT VOLTAGE
* DIELECTRIC WITHSTAND: INPUT / OUTPUT 1500 VAC FOR 1 MINUTE
INPUT TO FRAME GROUND 1500 VAC FOR 1 MINUTE
* EFFICIENCY: 65% TYPICAL, AT FULL LOAD
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OVER LOAD PROTECTION: 110~160% MAX
* OVER VOLTAGE PROTECTION: +5V → 5.7V ~ 6.5V, +3.3V →3.9V~4.3V,+12V → 13.3V ~ 14.3V * OVER CURRENT PROTECTION * EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
* SAFETY: UL, CUL, TÜV, CCC, GOST, BSMI
* REMOTE ON / OFF CONTROL
* FAULTY ALARM METHODS:LED, BUZZER, TTL SIGNAL
* MEET IEC-1000-3-2 CLASS D ( ACTIVE PFC)
* HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
* REMOTE SENSING DESIGN
* ISOLATION:BUILT-IN THE POWER MODULE
* AC INLET IN EACH MODULE

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.

这里已调用系统的信息评论模块,无需修改!

这里已调用系统的评论列表模块,无需修改!

上一条: R2A-5350P(350W) 下一条: M1Z2-5550V3V(550W)

最新动态

M2W-6500P(500W)