详细说明
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 1.0 | 32 | ±5% | ±1% | 50mV |
| +12V | 2.0 | 45 | ±5% | ±1% | 120mV |
| -12V | 0 | 1 | ±5% | ±1% | 120mV |
| +3.3V | 1.0 | 25 | ±5% | ±1% | 50mV |
| +5VSB | 0.1 | 3.0 | ±5% | ±1% | 50mV |
* TEMPERATURE RANGE: OPERATING 0℃ --- 45℃,STORAGE -40℃ --- 70℃
* HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & 90VAC INPUT VOLTAGE
* EFFICIENCY: 70% TYPICAL AT 115VAC, FULL LOAD
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION
* OVER VOLTAGE PROTECTION
* OVER CURRENT PROTECTION
* SHORT CIRCUIT PROTECTION
* EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
* FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL
* WARNING METHOD: AUDIO ALARM, POWER DETECTIVE SIGNAL DELIVERY
* REMOTE SENSING DESIGN
* ISOLATION: BUILT-IN THE POWER MODULE
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回