产品中心
当前位置 ：网站首页 > 产品中心
产品中心

P1U-6250P(250W)

详细说明


250W

Server ,Workstation ,Storage System ,IPC                                                                            


Dimension....
190x100x40(mm)
7.48x3.94x1.57(inch)

AC Input Spec...
VOLTAGE: 90 ~ 264 VAC FULL RANGE
FREQUENCY : 47 ~ 63 HZ
INPUT CURRENT: 4~2 AMPS MAXIMUM AT ANY LOW/HIGH
RANGE INPUT VOLTAGE.
INRUSH CURRENT: 65/130 AMPS @110/220 VAC
(AT 25 DEGREES AMBIENT COLD START)

DC Output Spec...
Output VoltageTDOutput Current Min.Output Current Max.Regulation LoadRegulation LineOutput Ripple & Noise Max.[P-P]
5V216± 5%± 1%70mV
+12V116± 5%± 1%120mV
-5V0.10.2± 5%± 1%100mV
-12V0.10.7-10%~+10%± 1%120mV
+3.3V114± 5%± 1%70mV
+5VSB0.11.5± 5%± 1%70mV
REMARKS: 1. THE OUTPUT POWER OF +5V & +3.3V NOT EXCEED 110 WATTS
2. +5V,+3.3V AND +12V TOTAL OUTPUT MAX : 236W
3. +3.3V CURRENT DERATING LINEARLY TO 10A AT 45℃
                    

Features...
* TEMPERATURE RANGE: OPERATING 0℃ ~ 45℃, STORAGE -20℃~80℃
* EFFICIENCY: POWER SUPPLY EFFICIENCY TYPICAL 65% AT 115V，FULL LOAD.
* HOLD UP TIME: WHEN POWER SHUTDOWN DC OUTPUT 5V MUST BE MAINTAIN 16MSEC IN REGULATION LIMIT AT NORMAL INPUT VOLTAGE
* HUMIDITY:OPERATING:20%-80%, NON-OPERATING:10%-90%
* REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
* OVER POWER PROTECTION: 110~160%
* OVER VOLTAGE PROTECTION: +5V ：5.6V ∼ 6.6V, +3.3V ：3.6V ∼ 4.2V, +12V ：13.2V ∼ 14.6V
* SHORT CIRCUIT PROTECTION
* LEAKAGE CURRENT: 3.5 MA. MAX. AT NOMINAL VOLTAGE 250 VAC
* SAFETY: TO MEEET UL, CUL, TUV
* REMOTE ON/OFF CONTROL

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
这里已调用系统的信息评论模块,无需修改!
这里已调用系统的评论列表模块,无需修改!
上一条: P1P-5407V(400W) 下一条: P1U-5400E(400W)