P1U-5400E(400W)

详细说明

400W

Server ,Workstation ,Storage System ,IPC

Dimension....

190x100x40(mm)
7.48x3.94x1.57(inch)

AC Input Spec...

VOLTAGE: 90 ~ 264 VAC FULL RANGE
FREQUENCY : 47 ~ 63 HZ
INPUT CURRENT: 8/3 AMPS MAXIMUM AT ANY LOW/HIGH
RANGE INPUT VOLTAGE.
INRUSH CURRENT: 15/30 AMPS @115/220 VAC
(AT 25 DEGREES AMBIENT COLD START)

DC Output Spec...

Output VoltageTD	Output Current Min.	Output Current Max.	Regulation Load	Regulation Line	Output Ripple & Noise Max.[P-P]
+5V	0.1	18	± 5%	± 1%	60mV
+12V	0.1	32	± 5%	± 1%	120mV
-12V	0.1	0.5	± 5%	± 1%	120mV
+3.3V	0.1	18	± 5%	± 1%	50mV
+5VSB	0.1	3	± 5%	± 1%	50mV

REMARKS:
1.TOTAL MAX OUTPUT OF +5V AND +3.3V NOT EXCEED 105W
2.POWER MODULE TOTAL OUTPUT POWER NOT EXCEED 400W

Features...

* TEMPERATURE RANGE: OPERATING 0℃ ~ 45℃, STORAGE -20℃~80℃
* EFFICIENCY: POWER SUPPLY EFFICIENCY TYPICAL 88%(+/-2) AT 115V，FULL LOAD.
* HOLD UP TIME: WHEN POWER SHUTDOWN DC OUTPUT 5V MUST BE MAINTAIN 16MSEC IN REGULATION LIMIT AT NORMAL INPUT VOLTAGE
* HUMIDITY:OPERATING:20%-80%, NON-OPERATING:10%-90%
* REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
* OPP / OVP / SCP
* LEAKAGE CURRENT: 3.5 MA. MAX. AT NOMINAL VOLTAGE 250 VAC
* SAFETY: TO MEEET UL, CUL, TUV, CCC
* REMOTE ON/OFF CONTROL
* ErP READY

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.

这里已调用系统的信息评论模块,无需修改!

这里已调用系统的评论列表模块,无需修改!

上一条: P1U-6250P(250W) 下一条: P1H-5500K(500W)

最新动态

P1U-5400E(400W)