详细说明
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| 5V | 3.0 | 35 | ± 5% | ± 50mV | 50mV |
| 12V | 2.0 | 22 | ± 5% | ± 120mV | 100mV |
| -5V | 0.1 | 0.5 | ± 10% | ± 120mV | 150mV |
| -12V | 0.1 | 0.8 | ± 10% | ± 120mV | 150mV |
| 3.3V | 1.0 | 20 | ± 5% | ± 50mV | 50mV |
| +5VSB | 0.1 | 2.0 | ± 5% | ± 50mV | 50mV |
* TEMPERATURE RANGE: OPERATING: -10℃ --- 40℃(-36V ~-72VDC INPUT)
-10℃ --- 50℃(-46V~-72VDC INPUT) STORAGE: -20℃ --- 80℃ * HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95%
* REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
* HOLD UP TIME: 1.6 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
* DIELECTRIC WITHSTAND: INPUT / OUTPUT 1500 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND
* EFFICIENCY: 65% TYPICAL AT -48VDC FULL LOAD
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION: 110% ~ 160%
OVER VOLTAGE PROTECTION: +5V → 5.7V ~ 6.7V, 3.3V → 3.7V ~ 4.7V +12V → 13.0V ~ 15.0V OVER CURRENT PROTECTION: 110% ~ 150%
* SHORT CIRCUIT PROTECTION: +5V, -5V, +12V, -12V, +3.3V, +5VSB
* EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A
* SAFETY: UL 1950, CSA 22.2 NO/ 950, TÜV IEC 950
* REMOTE ON / OFF CONTROL
THE UNIT SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE / ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STANDBY), AS LOGIC LEVEL IS LOW, OUTPUTS VOLTAGE WERE ENABLE, AS LOGIC LEVEL IS HIGH, OUTPUTS VOLTAGE WERE DISABLE.
* 3.3V / 5V REMOTE SENSING
* CONNECTOR POWER INPUT
A. POSITRONIC: PLB06M CONNECTOR
B. TERMINAL BLOCK
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回