详细说明
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 3.0 | 25 | ±5% | ±1% | 50mV |
| +12V | 2 | 28 | ±6% | ±1% | 100mV |
| -5V | 0.1 | 0.5 | ± 10% | ±1% | 150mV |
| -12V | 0.1 | 0.8 | +5, -7% | ±1% | 100mV |
| +3.3V | 1.0 | 20 | ±5% | ±1% | 50mV |
| +5VSB | 0.1 | 2 | ±5% | ±1% | 50mV |
* TEMPERATURE RANGE: OPERATING 0℃ --- 40℃, STORAGE -20℃ - 80℃
* HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
* EFFICIENCY: 65% TYPICAL AT 115V, FULL LOAD
* REMOTE ON/OFF CONTROL
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION: 110~160%
* OVER VOLTAGE PROTECTION: +5V: 5.7~6.7V, +3.3V: 3.7~4.7V, +12V: 13~15V
* SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, AUTO-RECOVERED: -5V, -12V, +5VSB
* EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
* SAFETY: TO MEET UL, TUV, CB *ACTIVE POWER FACTOR CORRECTION MEET IEC-1000-3-2 CLASS D
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回