详细说明
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 0.5 | 25 | ±5% | ±1% | 50mV |
| +12V | 2.0 | 33 | ±5% | ±1% | 120mV |
| -12V | 0.2 | 0.8 | ±10% | ±1% | 120mV |
| +3.3V | 0.5 | 25 | ±5% | ±1% | 50mV |
| +5VSB | 0.1 | 3.5 | ±5% | ±1% | 50mV |
* TEMPERATURE RANGE: OPERATING 0℃ ~ 40℃,STORAGE -20℃ ~ 80℃
* HOLD UP TIME: WHEN POWER SHUTDOWN DC OUTPUT 5V MUST BE MAINTAIN 16 ms IN REGULATION LIMIT AT NORMAL INPUT VOLTAGE
* DIELECTRIC WITHSTANDING: INPUT/OUTPUT 1500 VAC FOR 1 MINUTE
* INPUT TO FRAM GROUND 1500 VAC FOR 1 MINUTE
* EFFICIENCY: >80% TYPICAL AT 115V, FULL LOAD
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION: 110%~180%
* OVER VOLTAGE PROTECTION: +5V→5.9~6.7V, +3.3V→3.9~4.3V, +12V→13~15V
* OVER CURRENT PROTECTION: +3.3V→27.5~37.5A, +5V→27.5~37.5A, +12V→36.3~52.8A
* SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V, AUTO-RECOVERED: +5VSB
* EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
* FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL
* LEAKAGE CURRENT: 3.5MA MAX. AT NOMINAL VOLTAGE 250VAC
* MEET IEC-1000-3-2 CLASS D (ACTIVE PFC)
* N+1 BALANCE LOAD SHARING DESIGN ON 5/12/3.3V CHANNEL
* REMOTE ON/OFF CONTROL
* SAFETY: TO MEET UL, TUV, CB, CCC
* ISOLATION: BUILT-IN THE POWER MODULE
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回