详细说明
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 1 | 24 | ±5% | ±1% | 50mV |
| +12V | 2 | 116 | ±5% | ±1% | 120mV |
| -12V | 0 | 1.5 | ±5% | ±1% | 120mV |
| +3.3V | 1 | 24 | ±5% | ±1% | 50mV |
| +5VSB | 0.1 | 4 | ±5% | ±1% | 50mV |
* TEMPERATURE RANGE：OPERATING 0℃～50℃，STORAGE TEMPERATURE：-20℃～80℃
* HOLD UP TIME：WHEN POWER SHUTDOWN DC OUTPUT 12V MUST BE MAINTAIN 17mSEC IN REGULATION LIMIT AT 115 VAC INPUT VOLTAGE AND 1000W OUTPUT LOAD
* EFFICIENCY：90% TYPICAL AT 230V, 50% OF FULL LOAD
* POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1mS
* OVER POWER PROTECTION：110～150% MAX
* OVER VOLTAGE PROTECTION： +12V→12.8V～13.9V, +5V→5.7V～6.5V, +3.3V：3.7V～4.1V
* OVER CURRENT PROTECTION：110％～150％
* SHORT CIRCUIT PROTECTION： +5V, +3.3V, +12V
* EMI NOISE FILTER : FCC CLASS B, CISPR22 CLASS B
* SAFETY : TO MEET UL, CUL, TUV, CCC
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回