详细说明
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 0.5 | 24 | ± 5% | ± 1% | 50mV |
| +12V | 1 | 28 | ± 5% | ± 1% | 120mV |
| -12V | 0 | 0.8 | ±5% | ± 1% | 120mV |
| +3.3V | 0 | 24 | ±5% | ± 1% | 50mV |
| +5VSB | 0.1 | 3.5 | ± 5% | ± 1% | 50mV |
* TEMPERATURE RANGE：OPERATING 0℃～50℃，STORAGE -20℃～80℃
* HOLD UP TIME：5V MUST BE MAINTAIN 1.6 mS MIN IN REGULATOIN LIMIT AT INPUT NORMAL VOLTAGE
* EFFICIENCY：>80% TYPICAL，AT INPUT 24VDC FULL LOAD
* POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1mS
* OVER POWER PROTECTION：110～160% MAX
* OVER VOLTAGE PROTECTION：+5V→5.7V～6.5V，+3.3V→4.0V～5.7V ，+12V→14.3V～17.3V
* OVER CURRENT PROTECTION:+5V,+12V,+3.3V
* SHORT CIRCUIT: +5V, +3.3V, +12V, -12V
* SAFETY：TO MEET UL, CUL, TUV, CCC
* REMOTE ON / OFF CONTROL
* WARMING METHOD: AUDIO ALARM, TTL, LOW ACTIVE
* DC INLET IN EACH MODULE
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回