BP1H-6300F(300W)

详细说明

300W

Label

Dimension....

225x100x40.5(mm)
8.85x3.94x1.59(inch)

AC Input Spec...

VOLTAGE： DC 20V～28V
INPUT CURRENT：20.0A (RMS) FOR 24 VDC
INRUSH CURRENT：20.0A MAX.

DC Output Spec...

Output VoltageTD	Output Current Min.	Output Current Max.	Regulation Load	Regulation Line	Output Ripple & Noise Max.[P-P]
+5V	1	35	±5%	±1%	80mV
+12V	1	22	±5%	±1%	120mV
-5V	0.1	0.5	±10%	±1%	120mV
-12V	0.1	0.5	±5%	±1%	150mV
+3.3V	1	20	±5%	±1%	80mV
+5VSB	0.1	2	±5%	±1%	50mV

+5V AND +3.3V TOTAL OUTPUT MAX : 40A

Features...

*TEMPERATURE RANGE：OPERATING -10℃～40℃
* HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95%
* REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
*HOLD UP TIME：1.6mS MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE
*DIELECTRIC WITHSTAND：INPUT/OUTPUT 1500 VAC FOR 1 SECOND
INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND
*EFFICIENCY：65% TYPICAL，AT FULL LOAD
*POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS
*OVERLOAD PROTECTION：130±20%
*OVER VOLTAGE PROTECTION：+5V→5.5V～7.0V , +3.3V→4.0V～4.5V
*SHORT CIRCUIT PROTECTION：+5V、+12V、+3.3V
*EMI NOISE FILTER : FCC CLASS A, CISPR22 CLASS A
*SAFETY : UL 60950, CSA 22.2 IEC60950, TUV EN60950
*REMOTE ON/OFF CONTROL
THE UNIT SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STAND BY).
AS LOGIC LEVEL IS LOW，OUTPUTS VOLTAGE WERE ENABLE
AS LOGIC LEVEL IS HIGH，OUTPUTS VOLTAGE WERE DISABLE
*COOLING :Two 40mm DC FANS

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.

这里已调用系统的信息评论模块,无需修改!

这里已调用系统的评论列表模块,无需修改!

上一条: H1M-6600P(600W) 下一条: H1M-6607P(600W)

最新动态

BP1H-6300F(300W)