VOLTAGE： 90～264VAC FULL RANGE FREQUENCY： 47～63HZ INPUT CURRENT：7A/11A（RMS）FOR 230/115VAC INRUSH CURRENT：90A/130A MAX. FOR 115/230 VAC PER MODULE
DC Output Spec...
Output VoltageTD
Output Current Min.
Output Current Max.
Regulation Load
Regulation Line
Output Ripple & Noise Max.[P-P]
+5V
1
30
50mV
-5V
0
0.5
100mV
+12V
2
48
100mV
-12V
0
0.5
100mV
+3.3V
1
24
50mV
+5VSB
0.1
4
50mV
+5V and +3.3V total output max: 180W +5V, +12V and +3.3V total output max: 580W, pack: 600W NOISE BANDWIDTH IS FROM DC TO 20MHZ.
Features...
*TEMPERATURE RANGE：OPERATING 0℃～40℃，STORAGE -20℃～80℃ * HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95% * REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS *HOLD UP TIME：16mS MIN. *DIELECTRIC WITHSTAND：INPUT/OUTPUT 1500 VAC FOR 1 minute INPUT TO FRAME GROUND 1500 VAC FOR 1 minute *HUMIDITY：10～90%RH *EFFICIENCY：70% TYPICAL AT 115V，AT FULL LOAD *POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1mS *OVERLOAD PROTECTION：110～150% MAX *OVER VOLTAGE PROTECTION：+5V→5.7V～6.5V，+3.3V→3.7V～4.1V ，+12V→13.3V～14.5V * EMI NOISE FILTER: FCC CLASS B , CISPR 22 CLASS B *SAFETY：EACH POWER UNIT MEET UL/CSA/TUV STANDARD *MEET IEC-1000-3-2 CLASS D
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回