产品中心
当前位置 ：网站首页 > 产品中心
产品中心

M1W1-5A10V3H(1010W)

详细说明


1010W

Server ,Workstation ,Storage System ,IPC ,Blade server ,PCs ,Communication                                                                  


Dimension....
320x98.4x40(mm)
12.6x3.87x1.57(inch)

AC Input Spec...
VOLTAGE: 90~264 VAC FULL RANGE
FREQUENCY: 47 ~ 63 Hz
INPUT CURRENT: 15 / 7.5 A FOR 115 / 230 VAC
INRUSH CURRENT: 15 / 30 AMPS @115/230VAC.
HIGH FREQUENCY PEAK AMPLITUDES LASTING LESS
THAN 200US(AT 25DEGREES AMBIENT COLD START
FOR EACH POWER UNIT)

DC Output Spec...
Output VoltageTDOutput Current Min.Output Current Max.Regulation LoadRegulation LineOutput Ripple & Noise Max.[P-P]
+5V124± 5%± 1%50mV
+12V283± 5%± 1%120mV
-12V01.5± 5%± 1%120mV
+3.3V124± 5%± 1%50mV
+5VSB0.14.0± 5%± 1%50mV
* POWER MODULE TOTAL OUTPUT POWER OF +5V AND +3.3V NOT EXCEED 135W                    

Features...
* TEMPERATURE RANGE: OPERATING 0℃ --- 50℃, STORAGE –20℃ --- 80℃; OPERATING TEMPERATURE FROM 0℃ SHOULD START FROM AC 90V
* HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & 90 VAC INPUT VOLTAGE
* EFFICIENCY: TYPICAL 84% AT 115V, 86% AT 230V, FULL LOAD
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION: 110~150%
* OVER VOLTAGE PROTECTION: +3.3V→3.7~4.1V, +5V→5.7~6.5V, +12V→12.8~13.9V
* OVER CURRENT PROTECTION: THE POWER SUPPLY SHALL LATCH OFF IF THE +12V OUTPUT CURRENTS ARE OVER IT’S LIMITATION. THE LIMITED CURRENT IS OVER 110~150% FOR EACH POWER MODULE.
* SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V OUTPUT TO DC RETURN SHALL CAUSE NO DAMAGE AND POWER SUPPLY LATCH, -12V SHORT CIRCUIT TO DC RETURN SHALL CAUSE NO DAMAGE.
* SAFETY: MEET UL, CUL, TÜV
* MEET IEC-1000-3-2 CLASS D

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
这里已调用系统的信息评论模块,无需修改!
这里已调用系统的评论列表模块,无需修改!
上一条: GIN1-5800V4D(800W) 下一条: KIN1-5A00V4D(1000W)