BMTW1-5601V4H(600W)

详细说明

600W

Server ,Workstation ,Storage System ,IPC ,Blade server ,PCs ,Communication

Dimension....

340x102x41(mm)
13.39x4.02x1.61(inch)

AC Input Spec...

VOLTAGE: 19~36 VDC, NORMAL 24VDC
STEADY-STATE CURRENT: 19~36VDC / 45~ 21 AMP
(33 AMP AT 24VDC)
INRUSH CURRENT: 50 AMPS @24VDC
(AT 25 DEGREES AMBIENT COLD START FOR EACH POWER UNIT)

DC Output Spec...

Output VoltageTD	Output Current Min.	Output Current Max.	Regulation Load	Regulation Line	Output Ripple & Noise Max.[P-P]
+5V	0.5	42	± 5%	± 1%	60mV
+12V	2	50	± 5%	± 1%	120mV
-12V	0	0.8	± 5%	± 1%	120mV
+3.3V	0.5	20	± 5%	± 1%	50mV
+5VSB	0.1	3.5	± 5%	± 1%	50mV

* +5V AND +3.3V TOTAL OUTPUT MAX : 230W
* TOTAL OUTPUT MAX : 600W (AT 18V ONLY 550W, AT 17V ONLY 500W)
* DE-RATING AT +12V RAIL AMPERE OUTPUT WHEN NEEDED, BOTH +5V AND +3.3V MAXIMUM OUTPUT REMAIN ON SAME

Features...

* TEMPERATURE RANGE: OPERATING 0℃ ~ 60℃, STORAGE –20℃ ~ 80℃
* HOLD UP TIME: WHEN POWER SHUTDOWN DC OUTPUT 5V MUST BE MAINTAIN 1MSEC IN REGULATION LIMIT AT NORMAL INPUT VOLTAGE
* EFFICIENCY: TYPICAL >80% AT 24VDC
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 550 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION: 110~160%
* OVER VOLTAGE PROTECTION: +3.3V→3.9~4.3V, +5V→5.9~6.7V, +12V→13.3~15V
* OVER CURRENT PROTECTION: THE POWER SUPPLY SHALL LATCH OFF IF THE +12V OUTPUT CURRENTS ARE OVER IT’S LIMITATION. THE LIMITED CURRENT IS OVER 110~160% FOR EACH POWER MODULE.
* SHORT CIRCUIT PROTECTION: A SHORT CIRCUIT PLACED ON +5V,+3.3V,+12V OUTPUT TO DC RETURN SHALL CAUSE NO DAMAGE AND POWER SUPPLY LATCH. -12V SHORT CIRCUIT TO DC RETURN SHALL CAUSE NO DAMAGE
* REMOTE ON/OFF CONTROL
* SAFETY: MEET UL, CUL, TÜV, CCC

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.

这里已调用系统的信息评论模块,无需修改!

这里已调用系统的评论列表模块,无需修改!

上一条: M1W1-5E00V3H(1400W) 下一条: BP2H-5460V(460W)

最新动态

BMTW1-5601V4H(600W)