VOLTAGE: 90~264VAC FULL RANGE FREQUENCY: 47~63Hz INPUT CURRENT: 11.0A FOR 115VAC, 5.0A FOR 230VAC INRUSH CURRENT: 35A MAX. FOR 115 VAC, 70A MAX. FOR 230 VAC
DC Output Spec...
Output VoltageTD
Output Current Min.
Output Current Max.
Regulation Load
Regulation Line
Output Ripple & Noise Max.[P-P]
+5V
0.5
30
±5%
±1%
60mV
+12V
2
50
±5%
±1%
120mV
-12V
0
0.8
±10%
±1%
120mV
+3.3V
0.5
25
±5%
±1%
60mV
+5VSB
0
3
±5%
±1%
60mV
REMARKS: +5V AND +3.3V MAX. POWER: 170W; TOTAL POWER: 650W(MAX)
Features...
‧TEMPERATURE RANGE: OPERATING 0℃ ~ 50℃, STORAGE -20℃~80℃ ‧HOLD UP TIME: 17 ms MINIMUM AT FULL LOAD UNDER 90V INPUT VOLTAGE ‧EFFICIENCY: 80~84% TYPICAL AT 115V, FULL LOAD ‧POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms ‧OVER POWER PROTECTION: 10~160% ‧OVER VOLTAGE PROTECTION: +3.3V→3.6~4.3V, +5V→5.6~6.5V, +12V→13.2~15V ‧OVER CURRENT PROTECTION: +3.3V→27.5~37.5A, +5V→33~45A, +12V→55~75A ‧SHORT CIRCUIT PROTECTION: +12V,+5V,+3.3V,-5V, +5VSB ‧LEAKAGE CURRENT: 3.5mA. MAX. AT NOMINAL VOLTAGE 264VAC ‧REMOTE ON/OFF CONTROL ‧EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B ‧COOLING: ONE 60mm DC FANS ‧SAFETY: UL&CUL, TUV, CCC
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回