产品中心
当前位置 ：网站首页 > 产品中心
产品中心

R1M-6251P(250W)

详细说明


250W

Server ,Workstation ,Storage System ,IPC ,Communication ,Networking                                                                     


Dimension....
260x180x40.6(mm)
10.23x7.08x1.59(inch)

AC Input Spec...
VOLTAGE: 90 ~ 264 VAC FULL RANGE
FREQUENCY : 47 ~ 63 Hz
INPUT CURRENT: 6.0 / 3.0 A FOR 115 / 230 VAC
INRUSH CURRENT: 60A / 90A MAX. FOR 115 / 230
VAC PER POWER MODULE
DC Output Spec...
Output VoltageTDOutput Current Min.Output Current Max.Regulation LoadRegulation LineOutput Ripple & Noise Max.[P-P]
+5V2.025± 5%± 1%50mV
+12V1.016± 7%± 1%100mV
-5V0.00.5±10%± 1%120mV
-12V0.00.5±10%± 1%150mV
3.3V1.015± 5%± 1%50mV
+5VSB0.12± 5%± 1%50mV
REMARKS: *TOTAL CURRENT OF +5V AND + 3.3V NOT EXCEED 28 A *TOTAL +5V AND 3.3V AND 12V POWER NOT EXCEED 232 W                     

Features...
* TEMPERATURE RANGE: OPERATING 0℃ --- 50℃, STORAGE –20℃ --- 80℃
* HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & 90 VAC INPUT VOLTAGEv * EFFICIENCY: 65% TYPICAL, AT FULL LOAD
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION
* OVER VOLTAGE PROTECTION
* OVER CURRENT PROTECTION
* SHORT CIRCUIT PROTECTION
* EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
* SAFETY: MEET UL, CSA 60950, TÜV EN-60950
* FAULTY ALARM METHODS : LED, BUZZER, TTL SIGNAL
* HOT-SWAPPABLE / HOT-PLUGGABLE 1 + 1 REDUNDANCY FUNCTION
* BALANCE LOAD SHARING DESIGN
* REMOTE SENSING DESIGN
* ISOLATION: BUILT-IN IN THE POWER MODULE
* MEET IEC-1000-3-2 CLASS D ( ACTIVE PFC )
* COOLING: TWO 40 mm DC FANS

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
这里已调用系统的信息评论模块,无需修改!
这里已调用系统的评论列表模块,无需修改!
上一条: P1H-5500K(500W) 下一条: R1Z-6400P(400W)