M1P2-5500V4H(500W)

详细说明

500W

Server ,Workstation ,Storage System

Dimension....

230x176x41.8(mm)
9.06x6.93x1.65(inch)

AC Input Spec...

VOLTAGE：90 ~ 264VDC
FREQUENCY: 47~63HZ
STEADY-STATE CURRENT: 8/4A MAX AT ANY LOW/HIGH VOLTAGE
INRUSH CURRENT: 40/60A @ 115/230VAC

DC Output Spec...

Output VoltageTD	Output Current Min.	Output Current Max.	Regulation Load	Regulation Line	Output Ripple & Noise Max.[P-P]
+5V	0.5	32	±5%	±1%	50mV
+12V	2	41	±5%	±1%	120mV
-12V	0.1	0.5	±10%	±1%	120mV
+3.3V	0.5	25	±5%	±1%	50mV
+5VSB	0.1	3.5	±5%	±1%	50mV

* +5V AND +3.3V TOTAL OUTPUT MAX: 170W

Features...

* TEMPERATURE RANGE：OPERATING 0℃～40℃, STOREAGE -20℃~80℃
* HOLD UP TIME：16mS IN REGULATOIN LIMIT AT 90VAC INPUT VOLTAGE
* EFFICIENCY(PER SET)：POWER SUPPLY EFFICIENCY TYPICAL >80% AT 230V, FULL LOAD
* OUTPUT PROTECTION: OPP / OVP / SCP / OCP
* REMOTE ON / OFF CONTROL
* BALANCE LOAD SHARING DESIGN
* HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
* ISOLATION: BUILT-IN THE POWER MODULE
* FAULTY ALARM METHODS: BUZZER, TTL SIGNAL
* EMI: IEC61000-3-2, FCC, CISPR 22(EN 55022)
* EMS: EN 61000-4-2 ESD, EN61000-4-4 EFT, EN61000-4-5 SURGE
* SAFETY APPROVAL: UL, CUL, TUV, CCC

* THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.

这里已调用系统的信息评论模块,无需修改!

这里已调用系统的评论列表模块,无需修改!

上一条: M1P2-5420V4H(420W) 下一条: MP2M-5435V(435W)

最新动态

M1P2-5500V4H(500W)