详细说明
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 3.5 | 27 | ±5% | ±1% | 70 |
| -5V | 0.05 | 0.7 | +5/-10% | ±1% | 120mV |
| +12V | 2 | 32 | ±6% | ±1% | 120mV |
| -12V | 0.05 | 0.7 | +5/-10% | ±1% | 120mV |
| +3.3V | 1 | 24 | ±5% | ±1% | 70mV |
| +5VSB | 0.1 | 2.0 | +5/-6% | ±1% | 70mV |
‧TEMPERATURE RANGE: OPERATING 0℃ --- 40℃,STORAGE -20℃ --- 80℃
‧HOLD UP TIME: 1.6 ms MINIMUM AT FULL LOAD & -48VDC INPUT VOLTAGE
‧EFFICIENCY: 71% TYPICAL AT DC-48 INPUT, FULL LOAD
‧POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
‧OVER POWER PROTECTION
‧OVER VOLTAGE PROTECTION
‧OVER CURRENT PROTECTION
‧SHORT CIRCUIT PROTECTION
‧EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A
‧COOLING: TWO 38x38x28mm DC FANS (PER MODULE)
‧DC INLET IN EACH MODULE
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回