详细说明
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 0.5 | 18 | ±5% | ±1% | 50mV |
| +12V | 2 | 32 | ±5% | ±1% | 120mV |
| -12V | 0 | 0.5 | ±5% | ±1% | 120mV |
| +3.3V | 0.5 | 18 | ±5% | ±1% | 50mV |
| +5VSB | 0.1 | 2 | ±5% | ±1% | 50mV |
* TEMPERATURE RANGE：OPERATING 0℃～40℃
* HOLD UP TIME：16mS MINIMUM AT 115V LOAD
* EFFICIENCY：80-85% TYPICAL，AT 25℃ FULL LOAD 115VAC
* POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1Ms
* OVER POWER PROTECTION: 120～160% MAX
* OVER VOLTAGE PROTECTION: +5V→5.6V～6.5V, +3.3V→3.6V～4.3V, +12V→13.2V～15V
* SHORT CIRCUIT PROTECTION: +5V、+12V、-12V、+3.3V
* RESTART AFTER PRETECTION
* EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
* SAFETY: TO MEET UL60601, TUV EN-60601
* LEAKAGE CURRENT: 0.3mA. MAX. AT NOMINAL VOLTAGE 264VAC
* REMOTE ON/OFF CONTROL: THE POWER SUPPLY SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STAND BY). AS LOGIC LEVEL IS LOW，OUTPUTS VOLTAGE WERE ENABLE，AS LOGIC LEVEL IS HIGH，OUTPUTS VOLTAGE WERE DISABLE.
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回