详细说明
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 0.5 | 32 | ±5% | ±1% | 50mV |
| +12V | 2 | 65 | ±5% | ±1% | 120mV |
| -12V | 0 | 0.8 | ±5% | ±1% | 120mV |
| +3.3V | 0.5 | 32 | ±5% | ±1% | 50mV |
| +5VSB | 0.1 | 3.5 | ±5% | ±1% | 50mV |
* TEMPERATURE RANGE: OPERATING: 0℃ --- 50℃, STORAGE: -20℃ --- 80℃, OPERATING TEMPERATURE FROM 0℃ SHOULD START FROM DC-48V
* HOLD UP TIME: 1 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
* EFFICIENCY: >80% TYPICAL AT -48VDC FULL LOAD
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION: 110~160%
* OVER VOLTAGE PROTECTION: +5V: 5.9~6.7V, +3.3V: 3.9~4.3V, +12V: 13~15V
* OVER CURRENT PROTECTION: +3.3V: 35.2~48A, +5V: 35.2~48A, +12V: 71.5~97.5A
* SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V, AUTO-RECOVERED: +5VSB
* SAFETY: TO MEET UL, TUV
* WARNING METHOD: AUDIO ALARM, FAULT LED, TTL
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回