详细说明
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 0.5 | 32 | ±5% | ±1% | 50mV |
| +12V | 2.0 | 65 | ±5% | ±1% | 120mV |
| -12V | 0.0 | 0.5 | ±5% | ±1% | 120mV |
| +3.3V | 0.5 | 32 | ±5% | ±1% | 50mV |
| +5VSB | 0.1 | 3.5 | ±5% | ±1% | 50mV |
* TEMPERATURE RANGE: OPERATING 0℃ --- 40℃,STORAGE -20℃ --- 80℃
* HOLD UP TIME: POWER SHUTDOWN DC OUTPUT 5V MUST BE MAINTAIN 16mSEC IN REGULATION LITMIT AT NORMAL INPUT VOLTAGE
* EFFICIENCY: TYPICAL 85% MAX AT 115V
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION: 110 ~ 160% MAX, ONE UNIT
* OVER VOLTAGE PROTECTION: +5V → 5.8V ~ 6.9V, +3.3V → 3.9V ~ 4.6V, +12V → 13.9V ~ 16.4V
* SHORT CIRCUIT: +5V, +12V, +3.3V, -12V, AUTO-RECOVERED: +5VSB
* OVER CURRENT PROTECTION: +3.3V→35.2~48A, +5V→35.2~48A, +12V→71.5~97.5A
* EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
* SAFETY: TO MEET UL&CUL, TUV, CCC
* FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL
* HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
* N+1 BALANCE LOAD SHARING DESIGN ON 5/12/3.3V CHANNEL
* REMOTE ON/OFF CONTROL
* ISOLATION: BUILT-IN THE POWER MODULE
* COOLING: TWO 40 mm DC FANS (ONE IN EACH MODULE)
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回