详细说明
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 0.5 | 32 | ±5% | ±1% | 50mV |
| +12V | 2 | 83 | ±5% | ±1% | 120mV |
| -12V | 0 | 0.8 | ±10% | ±1% | 120mV |
| +3.3V | 1.5 | 32 | ±5% | ±1% | 50mV |
| +5VSB | 0.1 | 3.5 | ±5% | ±1% | 50mV |
* TEMPERATURE RANGE：OPERATING 0℃～40℃, STORAGE -20℃~80℃
* HOLD UP TIME：16mS MIN.
* DIELECTRIC WITHSTAND：INPUT/OUTPUT 1500 VAC FOR 1 MINUTE INPUT TO FRAME GROUND 1500 VAC FOR 1 MINUTE
* EFFICIENCY：>80% AT 115V, 20%~100% MAX LOAD.
* POWER GOOD SIGNAL：ON DELAY 100mS TO 500Ms
* OVER POWER PROTECITON: 110~160%
* OVER VOLTAGE PROTECTION：+3.3V→3.7V～4.1V，+5V→5.7V～6.2V ，+12V→13.3 V～14.3V
* OVER CURRENT PROTECTION: +5V→35~48A, +12V→91~125A, +3.3V→35~48A
* SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V
* REMOTE ON / OFF CONTROL
* REMOTE SENSING DESIGN
* BALANCE LOAD SHARING DESIGN
* HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
* ISOLATION: BUILT-IN THE POWER MODULE
* FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL
* EMI NOISE FILTER: FCC CLASS B , CISPR 22 CLASS B
* MEET IEC-1000-3-2 CLASS D (ACTIVE PFC)
* SAFETY：TO MEET UL, TUV, CB IEC 60950
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回