产品中心
当前位置 ：网站首页 > 产品中心
产品中心

MP1S-6400V(400W)

详细说明

 

400W
       

Server ,Workstation ,Storage System ,IPC 
    
                                                                       

Dimension....

250x81.5x40.3(mm)
9.84x3.21x1.59(inch)

AC Input Spec...
INPUT CHARACTERISTICS：VOLTAGE：90～264VAC FULL RANGE
FREQUENCY： 47～63HZ
INPUT CURRENT：4.5A (RMS) FOR 115 VAC / 2.0A (RMS) FOR 230 VAC
INRUSH CURRENT：70A MAX. FOR 115 VAC / 140A MAX. FOR 230 VAC
POWER FACTOR CORRECTION: PFC CAN REACH THE TARGET OF
95% AT 115/230VAC, FULL LOAD                
DC Output Spec...
Output VoltageTDOutput Current Min.Output Current Max.Regulation LoadRegulation LineOutput Ripple & Noise Max.[P-P]
+5V1.012±5%±1%60mV
+12V2.016±5%±1%120mV
-12V00.3±10%±1%120mV
+3.3V0.510±5%±1%60mV
+5VSB0.12.5±5%±1%60mV
+24V0.16±5%±1%240mV
* +5V AND +3.3V TOTAL OUTPUT MAX: 90W
* TOTAL POWER: 400W                    
Features...
TEMPERATURE RANGE：OPERATING 0℃～40℃, STORAGE –20℃~80℃
‧HOLD UP TIME：10mS MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE
‧EFFICIENCY：78~82% TYPICAL AT 115V, FULL LOAD
‧POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1mS
‧OVER POWER PROTECTION：110～160% MAX
‧OVER VOLTAGE PROTECTION: +3.3V→3.6~4.3V, +5V→5.6~6.5V, +12V→13.2~15V
‧OVER CURRENT PROTECTION; +3.3V→11~16A, +5V→13.2~19.2A, +12V→ >16A, <24A
‧SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V, +5VSB
‧SAFETY : TO MEET UL, TUV, RFI/EMI STANDARDS
‧EMI NOISE FILTER: FCC CLASS B, CISPR22(EN55022) CLASS B

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
这里已调用系统的信息评论模块,无需修改!
这里已调用系统的评论列表模块,无需修改!
上一条: MPSM-5500V(550W) 下一条: MP1S-6300V(300W)