详细说明
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 0.5 | 25 | ±5% | ±1% | 50mV |
| +12V | 2.0 | 48 | ±5% | ±1% | 120mV |
| -12V | 0.2 | 0.8 | ±10% | ±1% | 120mV |
| +3.3V | 0.5 | 25 | ±5% | ±1% | 50mV |
| +5VSB | 0.1 | 3.5 | ±5% | ±1% | 50mV |
* TEMPERATURE RANGE: OPERATING 0℃ --- 40℃, STORAGE –20℃ --- 80℃
* HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
* EFFICIENCY: >80% TYPICAL AT 115VAC, 20%~100% MAX LOAD.
* LEAKAGE CURRENT: 3.6MA. MAX AT NOMINAL VOLTAGE 250VAC
* REMOTE ON/OFF CONTROL
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION: 110~180%
* OVER VOLTAGE PROTECTION: +5V→5.9V~6.7V, +3.3V→3.9~4.3V, +12V→13~15V
* OVER CURRENT PROTECTION: +3.3V→27.5~37.5A, +5V→27.5~37.5A, +12V→51.7~70.5A
* SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V, +5VSB
* SAFETY: TO MEET UL, TUV, CB
* EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回