详细说明
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 0.5 | 30 | ±5% | ±1% | 50mV |
| +12V | 1 | 25 | ±5% | ±1% | 120mV |
| -12V | 0 | 0.8 | ±5% | ±1% | 120mV |
| +3.3V | 0.5 | 20 | ±5% | ±1% | 50mV |
| +5VSB | 0.1 | 3 | ±5% | ±1% | 50mV |
* TEMPERATURE RANGE: OPERATING 0 --- 45, STORAGE –20 --- 80
* HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & 90 VAC INPUT VOLTAGE * EFFICIENCY: 80% TYPICAL, AT FULL LOAD
* LEAKAGE CURRENT: 3.5MA. MAX. AT NOMINAL VOLTAGE 250VAC
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION: 110~160%
* OVER VOLTAGE PROTECTION: +5V→5.7~6.5V, +3.3V→3.9~4.7V, +12V→12.8~13.9V
* SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V, +5VSB
* OVER CURRENT PROTECTION: 5+V, +12V, +3.3V: 110~160%
* EMI: MEET FCC CLASS B, CISPR 22, CLASS B
* SAFETY: TO MEET UL, CUL, TUV, CB
* REMOTE ON/OFF CONTROL
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回