详细说明
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 0.5 | 32 | ±5% | ±1% | 50mV |
| +12V | 2 | 41 | ±5% | ±1% | 120mV |
| -12V | 0.1 | 0.5 | ±10% | ±1% | 120mV |
| +3.3V | 0.5 | 25 | ±5% | ±1% | 50mV |
| +5VSB | 0.1 | 3.5 | ±5% | ±1% | 50mV |
* TEMPERATURE RANGE：OPERATING 0℃～40℃, STOREAGE -20℃~80℃
* HOLD UP TIME：1mS IN REGULATOIN LIMIT AT NORMAL INPUT VOLTAGE (DC -48V)
* EFFICIENCY(PER SET)：POWER SUPPLY EFFICIENCY TYPICAL 80% AT 48VDCin, FULL LOAD
* OUTPUT PROTECTION: OPP / OVP / SCP / OCP
* REMOTE ON / OFF CONTROL
* BALANCE LOAD SHARING DESIGN
* HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
* ISOLATION: BUILT-IN THE POWER MODULE
* FAULTY ALARM METHODS: BUZZER, TTL SIGNAL
* EMI: IEC61000-3-2, FCC, CISPR 22(EN 55022)
* EMS: EN 61000-4-2 ESD, EN61000-4-4 EFT, EN61000-4-5 SURGE
* SAFETY APPROVAL: UL, CUL, TUV, CCC
* THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回