M1K2-5A00V4V(1000W)

详细说明

1000W

Server ,Workstation ,Storage System

425x54.5x84.6(mm)
16.73x2.15x3.33(inch)

VOLTAGE： 90～264VAC FULL RANGE
FREQUENCY： 47～63HZ
INPUT CURRENT：7.5A （RMS）FOR 230VAC
15A（RMS）FOR 115VAC
INRUSH CURRENT：15A MAX. FOR 115 VAC PER MODULE
30A MAX. FOR 230 VAC PER MODULE

Output VoltageTD	Output Current Min.	Output Current Max.	Regulation Load	Regulation Line	Output Ripple & Noise Max.[P-P]
+5V	0	22	±5%	±1%	50mV
+12V	2	83	±5%	±1%	120mV
-12V	0	0.5	±5%	±1%	120mV
+3.3V	0	22	±5%	±1%	50mV
+5VSB	0.1	3	±5%	±1%	50mV

* POWER MODULE TOTAL OUTPUT POWER OF +5V AND +3.3V NOT EXCEED 150W
* POWER MODULE TOTAL OUTPUT POWER NOT EXCEED 1000W *90Vac~132Vac INPUT:ONCE AC or PS_ON TURN ON THE POWER SUPPLY, THE TOTAL MAX. POWER IS REQUESTED TO BE LESS THAN 80% OF MAX. LOAD.

* TEMPERATURE RANGE：OPERATING 0℃～50℃，STORAGE -20℃～80℃
* HOLD UP TIME：10mS MIN. AT FULL LOAD & 115 VAC INPUT VOLTAGE
* DIELECTRIC WITHSTAND：INPUT/OUTPUT 1500 VAC FOR 1 minute INPUT TO FRAME GROUND 1500 VAC FOR 1 minute
* EFFICIENCY：TYPICAL 83% AT 115V, 12V/83A 5VSB/0.1A; TYPICAL 86% AT 230V, 12V/83A 5VSB/0.1A
* POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1mS
* OVER POWER PROTECTION：110～150% MAX
* OVER VOLTAGE PROTECTION：+3.3V→3.7~4.1V, +5V→5.7~6.5V, +12V→12.8~13.9V
* SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V
* SAFETY：TO MEET UL, CUL, TUV
* FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL
* MEET IEC-1000-3-2 CLASS D (ACTIVE PFC)

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.

这里已调用系统的信息评论模块,无需修改!

这里已调用系统的评论列表模块,无需修改!

上一条: M2W-6550P(550W) 下一条: M1K2-5A01V4V(1000W)

最新动态

M1K2-5A00V4V(1000W)