详细说明
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 0.5 | 20 | ±5% | ±1% | 50mV |
| +12V | 2 | 30 | ±5% | ±1% | 120mV |
| -12V | 0.1 | 0.5 | ±10% | ±1% | 120mV |
| +3.3V | 0.5 | 20 | ±5% | ±1% | 50mV |
| +5VSB | 0.1 | 2.5 | ±5% | ±1% | 50mV |
* TEMPERATURE RANGE：OPERATING 0℃～50℃, STOREAGE -20℃~80℃
* HOLD UP TIME：1.6mS MIN.
* DIELECTRIC WITHSTAND：INPUT/OUTPUT 1500 VAC FOR 1 MINUTE INPUT TO FRAME GROUND 1500 VAC FOR 1 MINUTE
* EFFICIENCY: POWER SUPPLY EFFICIENCY TYPICAL >80% AT -48VDC
* OVER POWER PROTECTION: 110~160%
* OVER VOLTAGE PROTECTION：+3.3V→3.6V～5V，+5V→5.6V～6.7V，+12V→13V～17V
* SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V
* REMOTE ON / OFF CONTROL
* REMOTE SENSING DESIGN
* BALANCE LOAD SHARING DESIGN
* HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
* ISOLATION: BUILT-IN THE POWER MODULE
* FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL
* EMI NOISE FILTER: FCC CLASS A , CISPR 22 CLASS A
* SAFETY：MEET UL, CUL, TUV, CCC
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回