详细说明
| Output VoltageTD | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 0 | 22 | ±5% | ±1% | 50mV |
| +12V | 2 | 54 | ±5% | ±1% | 120mV |
| -12V | 0 | 0.5 | ±5% | ±1% | 120mV |
| +3.3V | 0 | 22 | ±5% | ±1% | 50mV |
| +5VSB | 0.1 | 3 | ±5% | ±1% | 50mV |
* TEMPERATURE RANGE：OPERATING 0℃～50℃, STOREAGE -20℃~80℃
* HOLD UP TIME：WHEN POWER SHUTDOWN ALL DC OUTPUT MUST BE MAINTAIN 1mS IN REGULATION LIMIT AT -48V
* EFFICIENCY(PER SET)：TYPICAL 85% AT -48V
* OUTPUT PROTECTION: OPP / OVP / OCP / SCP
* REMOTE ON / OFF CONTROL
* REMOTE SENSING DESIGN
* BALANCE LOAD SHARING DESIGN
* HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
* ISOLATION: BUILT-IN THE POWER MODULE
* FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL
* THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回