M1X2-5700V0V(700W)

详细说明

700W

Server ,Workstation ,Storage System ,IPC

Dimension....

240x101x84(mm)
9.45x3.98x3.31(inch)

AC Input Spec...

VOLTAGE: 90 ~ 264 VAC FULL RANGE.
FREQUENCY: 47 ~ 63 Hz.
INPUT CURRENT: 5.5A (RMS) FOR 230 VAC
11A (RMS) FOR 115 VAC
INRUSH CURRENT: 30A MAX. FOR 115 VAC PER MODULE
60A MAX. FOR 230 VAC PER MODULE
POWER FACTOR CORRECTION: PFC CAN REACH THE
TARGET OF 95% AT 230V, FULL LOAD

DC Output Spec...

Output VoltageTD	Output Current Min.	Output Current Max.	Regulation Load	Regulation Line	Output Ripple & Noise Max.[P-P]
+5V	0.5	32	±5%	±1%	50mV
+12V	2.0	57	±5%	±1%	120mV
-12V	0	0.8	±10%	±1%	120mV
+3.3V	0.5	25	±5%	±1%	50mV
+5VSB	0.1	3.5	±5%	±1%	50mV

* +5V AND +3.3V TOTAL OUTPUT MAX: 170W
* TOTAL OUTPUT MAX: 700W

Features...

* TEMPERATURE RANGE: OPERATING 0℃ ~ 50℃, STORAGE –20℃ ~ 80℃
* HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
* EFFICIENCY: THE MAXIMUM POWER SUPPLY SYSTEM EFFICIENCY SHALL BE 80%, MEASURED AT NOMINAL INPUT VOLTAGE 230 V AND FULL LOADING.
* LEAKAGE CURRENT: 3.5MA. MAX AT NOMINAL VOLTAGE 240VAC
* REMOTE ON/OFF CONTROL
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1ms
* OVER POWER PROTECTION: 110~160%
* OVER VOLTAGE PROTECTION: +5V→5.7V~6.7V, +3.3V→3.9~4.7V, +12V→13.3~16.5V
* OVER CURRENT PROTECTION: +3.3V. +5V. +12V → 110~160%
* SAFETY: TO MEET UL/CUL, TUV, CB, CCC
* EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.

这里已调用系统的信息评论模块,无需修改!

这里已调用系统的评论列表模块,无需修改!

上一条: M1X2-5550V0V(550W) 下一条: M1W2-5700G0V(700W)

最新动态

M1X2-5700V0V(700W)