产品中心
当前位置 ：网站首页 > 产品中心
产品中心

M1D2-5800V0V(800W)

详细说明


800W

Server ,Workstation ,Storage System ,IPC ,Blade server ,PCs ,Communication ,Networking


Dimension....
200x101.2x84(mm)
7.87x3.98x3.31(inch)

AC Input Spec...
VOLTAGE： 90～264 Vac FULL RANGE
FREQUENCY： 47～63 Hz
INPUT CURRENT：12A (RMS) FOR 115V / 6A (RMS) FOR 230V
INRUSH CURRENT：15A MAX. FOR 115V / 30A MAX. FOR 230V

DC Output Spec...
Output VoltageTDOutput Current Min.Output Current Max.Regulation LoadRegulation LineOutput Ripple & Noise Max.[P-P]
+5V036±5%±1%50mV
+12V266±5%±1%120mV
+3.3V031±5%±1%50mV
-12V00.5±5%±1%120mV
+5VSB0.13±5%±1%50mV
* +5V AND +3.3V Max. POWER:210W
* TOTAL POWER: 800W (MAX)

Features...
* TEMPERATURE RANGE：OPERATING 0℃～50℃, STORAGE -20℃~80℃
* HOLD UP TIME：WHEN POWER SHUTDOWN DC OUTPUT 12V MUST BE MAINTAIN 10MSEC IN REGULATION LIMIT AT NORMAL INPUT VOLTAGE
* EFFICIENCY: THE MAXMUM POWER SUPPLY SYSTEM EFFICIENCY SHALL BE 85%, MEASURED AT NOMINAL INPUT VOLTAGE 115V OR 230V AND FULL LOADING.
* LEAKAGE CURRENT: 3.5 MA. MAX. AT NOMINAL VOLTAGE 240VAC
* REMOTE ON/OFF CONTROL
* POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1Ms
* OVER POWER PROTECTION： The power supply shall provide over power protection on the power supply latches all DC output into a shutdown state. Over power of this type shall cause no damage to power supply, after over load is removed and a power on/off cycle is initiated, the power supply will restart. Trigger point total power MIN. 105%, MAX. 150%.
* OVER VOLTAGE PROTECTION: +5V → 5.7~6.5V, +3.3V → 3.7~4.1V, +12V → 12.8~13.9V
* SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V, +5VSB
* OVER CURRENT PROTECTION
* SAFETY: TO MEET UL, CUL, TUV, CCC
* WARNING METHOD: AUDIO ALARM(BUZZER SOUND, RESETABLE), FALUT LED, TTL

* THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
这里已调用系统的信息评论模块,无需修改!
这里已调用系统的评论列表模块,无需修改!
上一条: G1W2-5860V2V(860W) 下一条: G1W2-5A10V2V(1010W)