M1W-2810V(810W)

详细说明

810W

Server ,Workstation ,Storage System ,Communication ,Networking

Dimension....

165.3x98.4x40(mm)
10.44x3.87x1.57(inch)

AC Input Spec...

VOLTAGE： 90～264VAC FULL RANGE
FREQUENCY： 47～63HZ
INPUT CURRENT：12A (RMS) FOR 115 VAC
6A (RMS) FOR 230 VAC
INRUSH CURRENT：15A MAX. FOR 115 VAC
30A MAX. FOR 230 VAC

DC Output Spec...

Output VoltageTD	Output Current Min.	Output Current Max.	Regulation Load	Regulation Line	Output Ripple & Noise Max.[P-P]
+12V	2	66	±5%	±1%	120mV
+5VSB	0.1	4	±5%	±1%	50mV

Features...

* TEMPERATURE RANGE：OPERATING 0℃～50℃
* HOLD UP TIME：16mS MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE
* DIELECTRIC WITHSTAND：INPUT/OUTPUT 1800 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1800 VAC FOR 1 SECOND
* EFFICIENCY：84% TYPICAL，AT 115Vac FULL LOAD, 87% TYPICAL，AT 230Vac FULL LOAD
* POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1mS OVERLOAD PROTECTION：110～150% MAX
* OVER VOLTAGE PROTECTION： +12V→13.2V～15V
* SHORT CIRCUIT PROTECTION： +12V
* EMI NOISE FILTER : FCC CLASS B, CISPR22 CLASS B
* SAFETY : TO MEET UL, CUL, TUV
* REMOTE ON/OFF CONTROL
* THE POWER SUPPLY SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STAND BY). AS LOGIC LEVEL IS LOW，OUTPUTS VOLTAGE WERE ENABLE， AS LOGIC LEVEL IS HIGH，OUTPUTS VOLTAGE WERE DISABLE.
* COOLING : TWO 38mm DC FANS
* MEET IEC-1000-3-2 CLASS D

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.

这里已调用系统的信息评论模块,无需修改!

这里已调用系统的评论列表模块,无需修改!

上一条: GIN-3800V(800W) 下一条: M1W-2910V(910W)

最新动态

M1W-2810V(810W)