VOLTAGE： 90～264VAC FULL RANGE FREQUENCY： 47～63HZ INPUT CURRENT：12A (RMS) FOR 115 VAC 6A (RMS) FOR 230 VAC INRUSH CURRENT：15A MAX. FOR 115 VAC 30A MAX. FOR 230 VAC
DC Output Spec...
Output VoltageTD
Output Current Min.
Output Current Max.
Regulation Load
Regulation Line
Output Ripple & Noise Max.[P-P]
+12V
2
75
±5%
±1%
120mV
+5VSB
0.1
4
±5%
±1%
50mV
MAX POWER：1000W
Features...
*TEMPERATURE RANGE：OPERATING 0℃～50℃ * HOLD UP TIME：16mS MINIMUM * DIELECTRIC WITHSTAND：INPUT/OUTPUT 1800 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1800 VAC FOR 1 SECOND * EFFICIENCY：83% TYPICAL，AT 115Vac FULL LOAD 86% TYPICAL，AT 230Vac FULL LOAD * POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS * OVERLOAD PROTECTION：110～150% MAX * OVER VOLTAGE PROTECTION： +12V→13.2V～15V * SHORT CIRCUIT PROTECTION： +12V * EMI NOISE FILTER : FCC CLASS B, CISPR22 CLASS B * SAFETY : UL 60950, CSA 22.2 NO 60950, TUV IEC 60950 * EMI NOISE FILTER: FCC CLASS A , CISPR 22 CLASS A * REMOTE ON/OFF CONTROL THE POWER SUPPLY SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STAND BY). AS LOGIC LEVEL IS LOW，OUTPUTS VOLTAGE WERE ENABLE， AS LOGIC LEVEL IS HIGH，OUTPUTS VOLTAGE WERE DISABLE. * COOLING : One 38mm DC FANS * DIMENSION： 335mm(L)×61mm(W)×45mm(H)(+/-0.5mm) * MEET IEC-1000-3-2 CLASS D
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回