VOLTAGE： 90～264VAC FULL RANGE FREQUENCY： 47～63HZ INPUT CURRENT：12A/6A (115 / 230 VAC) POWER MODULE INRUSH CURRENT：18A/36A MAX. FOR 115/ 230 VAC POWER MODULE
DC Output Spec...
Output VoltageTD
Output Current Min.
Output Current Max.
Regulation Load
Regulation Line
Output Ripple & Noise Max.[P-P]
+12V
2
65
±5%
±1%
120mV
+5VSB
0.1
3.5
±5%
±1%
50mV
Features...
* TEMPERATURE RANGE：OPERATING 0℃～40℃, STORAGE -20℃~80℃ *HOLD UP TIME：16mS MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE * DIELECTRIC WITHSTAND：INPUT/OUTPUT 1500 VAC FOR 60 SECOND INPUT TO FRAME GROUND 1500 VAC FOR 60 SECOND * EFFICIENCY：TYPICAL 85% AT 115VAC * POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS * OVER POWER PROTECTION：110% ~ 160% * OVER VOLTAGE PROTECTION：+12V→13.9V～16.4V * SHORT CIRCUIT PROTECTOIN: +12V, +5VSB * OVER CURRENT PROTECTION: +12V: 71.5~97.5A * LEAKAGE CURRENT: 3.5MA MAX AT NOMINAL VOLTAGE 250VAC * SHORT CIRCUIT PROTECTION：SHUT DOWN AND LATCH OFF * EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B * SAFETY: TO MEET UL, CUL, TUV, CCC, RFI/EMI STANDARDS * REMOTE ON/OFF CONTROL * CURRENT/BALANCE LOAD SHARING DESIGN * ISOLATION: BUILT-IN IN POWER MODULE * POWER FACTOR CORRENTION: ACTIVE (MEET IEC-1000-3-2) * COOLING: 40mm DC FANS (one module)
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回