产品中心
当前位置 ：网站首页 > 产品中心
产品中心

MRH2-5AD0V0H(1400W)

详细说明


1400W

Server ,Workstation ,Storage System


Dimension....
280x150x86(mm)
11.02x5.91x3.39(inch)

AC Input Spec...
VOLTAGE: 90 ~ 264 VAC FULL RANGE.
FREQUENCY: 47 ~ 63 Hz.
STEADY-STATE CURRENT: 15/10A AT ANY LOW/HIGH
RANGE INPUT VOLTAGE
INRUSH CURRENT: 15A MAX. FOR 110 VAC , 30A MAX.
FOR 220 VAC (AT 25 DEGREE C AMBIENT COLD START)
PFC: UP TO THE TARGET OF 95% @110V, FULL LOAD

DC Output Spec...
Output VoltageTDOutput Current Min.Output Current Max.Regulation LoadRegulation LineOutput Ripple & Noise Max.[P-P]
+5V136±5%±1%50mV
+12V2116±5%±1%120mV
-12V00.5±5%±1%120mV
+3.3V131±5%±1%50mV
+5VSB0.13±5%±1%50mV
REMARKS:
1.TOTAL MAX OUTPUT OF +5V AND +3.3V NOT EXCEED 210W
2.POWER MODULE TOTAL OUTPUT POWER NOT EXCEED 1400W FOR 180~264VAC
3.POWER MODULE TOTAL OUTPUT POWER NOT EXCEED 1200W FOR 103~132VAC

Features...
* TEMPERATURE RANGE: OPERATING 0℃ ~ 50℃; STORAGE TEMPERATURE: -20℃ – 80℃
* HOLD UP TIME: 16mS MINIMUM AT NOMINAL INPUT VOLTAGE
* EFFICIENCY: TYPICAL 82%(+/-2%) AT 115V, 25%~100% MAX LOAD
* LEAKAGE CURRENT: 3.5 mA. MAX. AT NOMINAL VOLTAGE 250VAC
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION: 105%~150%
* OVER VOLTAGE PROTECTION: +3.3V→3.7~4.1V, +5V→5.7~6.5V, +12V→12.8~13.9V
* OVER CURRENT PROTECTION
* SHORT CIRCUIT PROTECTION
* SAFETY: TO MEET UL, TUV, CB, CCC, RFI/EMI STANDARDS
* EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
* REMOTE ON/OFF CONTROL
* I2C FEATURES (OPTIONAL)


*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
这里已调用系统的信息评论模块,无需修改!
这里已调用系统的评论列表模块,无需修改!
上一条: MRS-6500P(500W) 下一条: MRW-5600G4V(600W)