产品中心
当前位置 ：网站首页 > 产品中心
产品中心

DP2H-6400F(400W)

详细说明


400W

Server ,Workstation ,IPC ,Communication


Dimension....
215x100x70(mm)
8.46x3.94x2.76(inch)

AC Input Spec...
VOLTAGE: DC -36V ~ -72 V
INPUT CURRENT: 12A (RMS) FOR -48VDC
INRUSH CURRENT: 10.0A MAX.

DC Output Spec...
Output VoltageTDOutput Current Min.Output Current Max.Regulation LoadRegulation LineOutput Ripple & Noise Max.[P-P]
+5V1.035± 5%± 50mV50mV
-5V0.10.5± 10%± 50mV120mV
+12V122± 5%± 50mV120mV
-12V00.5± 5%± 50mV150mV
+3.3V1.020± 5%± 50mV50mV
+5VSB0.12.0± 5%± 50mV50mV


Features...
‧TEMPRATURE RANGE: OPERATING -10℃ ---40℃
‧HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95%
‧REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
‧HOLD UP TIME: 1.6ms MINUMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE
‧DIELECTRIC WITHSTAND: INPUT/OUTPUT 1500 VAC FOR 1 SECOND
INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND
‧EFFICIENCY: 65% TYPICAL, AT FULL LOAD
‧POWER GOOD SIGNAL: ON DELAY 100ms TO 500ms, OFF DELAY ms
‧OVER LOAD PROTECTION: 110~150%
‧OVER VOLTAGE PROTECTION: +5V→5.5V~6.5V, +3.3V→3.9V~5.0V, +12V→13.0V~15.0V
‧SHORT CIRCUT PROTECTION: +5V, +12V, +3.3V
‧EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A
‧SAFETY: UL 1950, CSA 22.2 NO/950, TUV IEC 950
‧REMOTE ON /OFF CONTROL
THE UNIT SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE/ENABLE ALL THE OUTUT VOLTAGE(EXCLUDE +5V STANDBY), AS LOGIC LEVEL IS LOW, OUTPUTS VOLTAGE WERE ENABLE, AS LOGIC LEVEL IS HIGH, OUTPUTS VOLTAGE WERE DISABLE.
‧COOLING: 40mm DC FANS


*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
这里已调用系统的信息评论模块,无需修改!
这里已调用系统的评论列表模块,无需修改!
上一条: P2U-6320P(320W) 下一条: V2H-5350V(350W)