S1M-5350P(350W)

详细说明

350W

Server ,Workstation ,Storage System ,IPC ,Communication ,Networking

Dimension....

247.9x106x40(mm)
97.6x41.73x15.75(inch)

AC Input Spec...

VOLTAGE： 90 ~ 264VAC FULL RANGE
FREQUENCY： 47 ~ 63HZ
INPUT CURRENT：4A（RMS）FOR 230VAC, 8A（RMS）FOR 115VAC
INRUSH CURRENT：60A MAX. FOR 115 VAC PER MODULE,
100A MAX. FOR 230 VAC PER MODULE

DC Output Spec...

Output VoltageTD	Output Current Min.	Output Current Max.	Regulation Load	Regulation Line	Output Ripple & Noise Max.[P-P]
+5V	1.0	32	± 5%	± 1%	70mV
+12V	2.0	28	± 5%	± 1%	120mV
-12V	0	1.0	± 5%	± 1%	120mV
+3.3V	1	30	± 5%	± 1%	70mV
+5VSB	0.1	2.0	± 5%	± 1%	70mV

1. TOTAL CURRENT OF +5V AND +3.3V NOT EXCEED 50A 2. TOTAL OUTPUT POWER NOT EXCEED 460W

Features...

* TEMPERATURE RANGE：OPERATING 0℃～40℃，STORAGE -20℃～80℃
* HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95%
* REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
* HOLD UP TIME：16mS MIN. AT FULL LOAD & 90 VAC INPUT VOLTAGE
* DIELECTRIC WITHSTAND：INPUT/OUTPUT 1500 VAC FOR 1 minute
INPUT TO FRAME GROUND 1500 VAC FOR 1 minute
* EFFICIENCY：67% TYPICAL，AT FULL LOAD
* POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1mS
* OVER POWER PROTECTION：110～160% MAX
* OVER VOLTAGE PROTECTION：+5V→5.7V～6.5V，+3.3V→3.9V～4.7V ，+12V→13.3V～14.3V
* OVER CURRENT PROTECTION
* EMI : FCC CLASS B , CISPR 22 CLASS B
* SAFETY：UL, CSA, TUV
* REMOTE ON / OFF CONTROL
* FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL
* MEET IEC-1000-3-2 CLASS D (ACTIVE PFC)
* HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
* REMOTE SENSING DESIGN
* ISOLATION: BUILT-IN THE POWER MODULE
* COOLING: TWO 40x40x28mm DC FANS
* AC INLET IN EACH MODULE

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.

这里已调用系统的信息评论模块,无需修改!

这里已调用系统的评论列表模块,无需修改!

上一条: H1M-5807V(800W) 下一条: BP1H-5420V(420W)

最新动态

S1M-5350P(350W)