VOLTAGE： -36~-72VDC FULL RANGE INPUT CURRENT：17A（RMS）FOR –48VDC INRUSH CURRENT：30A MAX. FOR 48VDC PER MODULE
DC Output Spec...
Output VoltageTD
Output Current Min.
Output Current Max.
Regulation Load
Regulation Line
Output Ripple & Noise Max.[P-P]
+5V
0
30
50mV
-5V
0
0.8
50mV
+12V
2
50
100mV
-12V
0
0.8
100mV
+3.3V
0
30
50mV
+5VSB
0
2
50mV
The +12Vat 2A than +5Vmax current 20A and +3.3V Max. current 20A .+5V and +3.3V Max 40A The +12V over 4A than +5V and +3.3V Max. current 50A Total power : Input Voltage at –36VDC~-40Vdc the output power 550W(MAX) –40VDC~-72VDC the output power 600W(MAX) NOISE BANDWIDTH IS FROM DC TO 20MHZ.
Features...
*TEMPERATURE RANGE：OPERATING 0℃～40℃，STORAGE -20℃～80℃ *HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95% * REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS *HOLD UP TIME：16mS MIN. *DIELECTRIC WITHSTAND：INPUT/OUTPUT 1500 VAC FOR 1 minute INPUT TO FRAME GROUND 1500 VAC FOR 1 minute *HUMIDITY：5～90%RH *EFFICIENCY：70% TYPICAL AT 115V，AT FULL LOAD *POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1mS *OVER LOAD PROTECTION：110～160% MAX *OVER CURRENT PROTECTION : +5V→33A～45A，+3.3V→33A～45A，+12V→55A～65A OVER VOLTAGE PROTECTION：+5V→5.7V～6.5V，+3.3V→3.9V～4.3V ，+12V→13.6V～15V ，+12V2→13.6V～15V *EMI: FCC CLASS A , CISPR 22 CLASS A *MEET IEC-1000-3-2 CLASS D (ACTIVE PFC) *BUILT-IN FAN SPEED CONTROL
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回