产品中心
当前位置 ：网站首页 > 产品中心
产品中心

PSL-6AH0V(1800W)

详细说明


1800W

Server ,Workstation ,Storage System

Dimension....


250x150x86(mm)
9.84x5.91x3.39(inch)

AC Input Spec...
VOLTAGE: 90 ~ 264 VAC FULL RANGE
FREQUENCY: 47 ~ 63 Hz.
STEADY-STATE CURRENT: 26/13A AT ANY LOW/
HIGH RANGE INPUT VOLTAGE
INRUSH CURRENT: 60A MAX. FOR 110 VAC ,
80A MAX. FOR 220 VAC
(AT 25 DEGREE C AMBIENT COLD START)
PFC: UP TO THE TARGET OF 95% @230V, FULL LOAD

DC Output Spec...
Output VoltageTDOutput Current Min.Output Current Max.Regulation LoadRegulation LineOutput Ripple & Noise Max.[P-P]
+5V125±250mV±1%60mV
+12V1175±600mV±1%120mV
+12V2175±600mV±1%120mV
-12V00.8±600mV±1%120mV
+3.3V125±165mV±1%60mV
+5VSB0.13.5±250mV±1%60mV
+3.3V and +5V MAX. POWER: 170W
+3.3V AND +5V AND +12V2 MAX. POWER:900W
TOTAL POWER: 1800W(MAX)

Features...
‧TEMPERATURE RANGE: OPERATING 0℃ ~ 40℃; STORAGE TEMPERATURE: -20℃ ~ 80℃
‧HOLD UP TIME: 18mS MINIMUM AT 90V FULL LOAD & NOMINAL INPUT VOLTAGE
‧EFFICIENCY: 82% TYPICAL AT 115V, FULL LOAD
‧LEAKAGE CURRENT: 3.5 mA. MAX. AT NOMINAL VOLTAGE 264VAC
‧POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
‧OVER POWER PROTECTION: 110%~150%
‧OVER VOLTAGE PROTECTION: +3.3V→3.6~4.3V, +5V→5.5~6.5V, +12V1→13.2~15.6V, +12V2→13.2~15.6V
‧OVER CURRENT PROTECTION
‧SHORT CIRCUIT PROTECTION: +3.3V, +5V, +12V1, +12V2, -12V
‧SAFETY: TO MEET UL, CUL, TUV, RFI/EMI STANDARDS
‧EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
‧COOLING: 80mm DC FANS
‧I2C FEATURES (OPTIONAL)


*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
这里已调用系统的信息评论模块,无需修改!
这里已调用系统的评论列表模块,无需修改!
上一条: GU2-5C00V(1200W) 下一条: Q1D-5120V(120W)