产品中心
当前位置 ：网站首页 > 产品中心
产品中心

P1S-5200V(200W)

详细说明


200W

Server ,Workstation ,Storage System ,IPC
                                                                   


Dimension....
150x81.5x40.3(mm)
5.9x3.21x1.59(inch)

AC Input Spec...
VOLTAGE： 90～264VAC FULL RANGE
FREQUENCY： 47～63HZ
INPUT CURRENT：3A (RMS) FOR 115 VAC / 1.5A (RMS) FOR 230 VAC
INRUSH CURRENT：35A MAX. FOR 115 VAC / 70A MAX. FOR 230 VAC

DC Output Spec...
Output VoltageTDOutput Current Min.Output Current Max.Regulation LoadRegulation LineOutput Ripple & Noise Max.[P-P]
+5V014±5%±1%50mV
+12V0.116±5%±1%120mV
-12V00.3±10%±1%120mV
+3.3V012±5%±1%50mV
+5VSB02.5±5%±1%50mV
-5V00.3±5%±1%100mV
* -5V IS OPTION AND WE DID NOT PUT -5V IN OUT STANDARD MODEL
* +5V AND +3.3V TOTAL OUTPUT MAX: 70W
* +5V, +3.3V, +12V, -12V TOTAL OUTPUT MAX: 188W
* TOTAL POWER: 200W

Features...
* TEMPERATURE RANGE：OPERATING 0℃～50℃, STORAGE -20℃~80℃
* HOLD UP TIME：16mS MINIMUM AT 115V FULL LOAD
* DIELECTRIC WITHSTAND：INPUT/OUTPUT 1800 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1800 VAC FOR 1 SECOND
* EFFICIENCY：Power supply efficiency typical 80%(+/-2%) at 230Vin and Load condition: 12V10.43A;5V/7.33A;3.3V/7.33A;-12V/0.21A;5Vsb/2.17A
* POWER GOOD SIGNAL：ON DELAY 100mS TO 550mS，OFF DELAY 1mS
* OVER POWER PROTECTION：110～160% MAX
* OVER VOLTAGE PROTECTION: +3.3V→3.6~4.3V, +5V→5.6~6.5V, +12V→13.2~15V
* SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V, +5VSB
* SAFETY : TO MEET UL, TUV, CCC, CSA 22.2 NO 60950
* LEAKAGE CURRENT: 3.5MA MAX. AT NOMINAL VOLTAGE 264VAC

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
这里已调用系统的信息评论模块,无需修改!
这里已调用系统的评论列表模块,无需修改!
上一条: P1S-5221V(220W) 下一条: P1S-2500V(500W)