VOLTAGE: 90 ~ 264 VAC FULL RANGE. FREQUENCY: 47 ~ 63 Hz. INPUT CURRENT: 9A (RMS) FOR 230 VAC 18A/13A (RMS) FOR 115 VAC INRUSH CURRENT: 110A MAX. FOR 115 VAC PER MODULE 150A MAX. FOR 230 VAC PER MODULE PFC CAN REACH THE TARGET OF 95% @230V, FULL LOAD
DC Output Spec...
Output VoltageTD
Output Current Min.
Output Current Max.
Regulation Load
Regulation Line
Output Ripple & Noise Max.[P-P]
+5V
2
71
±5%
±1%
50mV
+12V
3
74
±5%
±1%
120mV
-12V
0.1
1.0
±5%
±1%
120mV
+3.3V
1
54
±5%
±1%
50mV
+5VSB
0.1
3.5
±5%
±1%
50mV
Features...
* TEMPERATURE RANGE: OPERATING 0℃ --- 40℃, STORAGE -20℃ --- 80℃ * HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD AT 115VAC * EFFICIENCY: 65% TYPICAL AT 115V, AT FULL LOAD * POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms * OVER POWER PROTECTION * OVER VOLTAGE PROTECTION * OVER CURRENT PROTECTION * SHORT CIRCUIT PROTECTION * FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL * REMOTE SIGNAL DESIGN * ISOLATION: BUILT-IN THE POWER MODULE * COOLING: THREE 40 mm DC FANS (ONE IN EACH MODULE)
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.
关闭返回